Guide rail lifting work platform

Guide rail lifting work platform introduction：

A  Guide  rail  lifting  work  platform  is mainly composed of a lifting table, a hydraulic cylinder, a hydraulic cylinder guide frame, a guide rail, a hydraulic pump station, an electrical system, etc. The guide rail type lifting platform is a special hydraulic lifting platform used for transporting goods between floors of buildings. It is mainly used to transport goods up and down between various working floors, lift cars between floors of three-dimensional garages and underground garages, etc. It is a kind of equipment installed on The factory's special equipment for loading goods mainly transports goods vertically to the second floor of the factory and floors above it.

product composition：

1. the countertop Improvement 

As the main force-bearing component of the equipment, the lifting table lifts the goods placed on it to the required height under the action of the lifting chain.

2. Hydraulic cylinder

Hydraulic cylinder is a hydraulic actuator. During the working process, the motor drives the oil pump, and the hydraulic oil pumped out by the oil pump passes through the hydraulic valve and pushes the hydraulic cylinder to extend, thereby driving the sprocket to move upward, and the sprocket drives the chain to pull the lifting table up. When the platform descends, the descending solenoid valve is turned on, the oil cylinder retracts, and the table top descends under the action of gravity.

3. Hydraulic cylinder guide frame

The cylinder guide frame is the guide component of the cylinder. Its main function is to move in the required direction during the extension and retraction of the cylinder. Since the cylinder is theoretically a two-force rod, it cannot withstand lateral forces other than the axial force. Therefore, in order to ensure its direction of travel, it must be guided.

4. Guide rail

We use 100*100*10H-shaped steel as the profile of the guide rail of the lifting platform. Its basic structure is an H-shaped structure, which has high strength, light weight, and is not easy to bend. Its main function is to keep the platform table level during rising and falling.

5. Hydraulic pump station

Use high-quality pump stations. Through the design of proprietary valves, this system places all the control valves in the system in the connecting flange, which not only makes the structure more compact, but also fundamentally solves the problem of the traditional external stacked valve block hydraulic station being large and easy to use. A leak occurs.

Product advantages：

1. Better safety and reliability:

(1) Equipped with anti-fall mechanical calipers. If the chain breaks, the anti-fall calipers are instantly stuck in fixed positions. The distance between each fixed position is less than 400mm to ensure safety. This solution is more reliable than steel wire rope.

(2) Larger safety load: After the platform reaches the floor, the four leveling devices are opened and parked on the second floor. The static load of the leveling devices can bear 2T, which increases the safety factor.

(3) Equipped with L1244 plate heavy-duty chain, which has a greater load-bearing capacity than the 16A chain

(4) The guardrail is increased from 1 meter to 1.5 meters to improve the safety of use.

2. Configuration upgrade:

The electrical part is equipped with international brands Schneider and Omron, the part is equipped with China's No. 1 brand CHINT, and the cable is equipped with China's well-known brand Far East Cable to ensure the stability and reliability of electrical appliances.

3. Comfortable to use:

the working noise is ≤45 decibels, which is more comfortable than similar products.

4. Beautiful:

The control button is an elevator button that displays the floor. Platform doors, etc. can also be individually customized in stainless steel according to customer requirements, making them more beautiful and elegant.